Belts for Rollermill
Belts for Rollermill
Belts for Rollermill
Belts for Rollermill
Video
  • Product introduction
  • Structure
  • Available profiles
  • Download
This belt for rollermill combines two of product technologies.
On one side the belt has a tooth profile of synchronous belt, and on the other side, it has a profile of ribbed v belt.
This combination of both timing and friction technology is required to mill grain into fine flour quality.
It combines the best of two worlds: optimized efficiency from a synchronous drive and ability to slip when blocked or overloaded from a would break, when this occurs.

* Chloroprene body provides protection against oil, grease, heat and aging.

* Glass fiber cords provides high strength, good flexing performance, and low elongation.

* Nylon fabric tooth facing provides resistance to abrasion and tooth shear.

Type Pitch Length(mm) Width(mm)
1880-RPP10M-17PL 1880 79.9
1760-RPP10M-17PL 1760 79.9
1760-RPP8M-12PK 1760 42.72
1760-RPP8M-24PK 1760 85.44
1760-RPP8M-28PK 1760 99.68
1760-RPP8M-26PL 1760 122.2
1552-S8M-30PK 1552 106.8
1552-S8M-16PK 1552 56.96
1552-S8M-14PK 1552 49.84
1600-S8M-12PK 1600 42.72
1200-S8M-12PK 1200 42.72
1400-8M-12PK 1400 42.72
1600-8M-12PK 1600 42.72
1680-8M-12PK 1680 42.72
1760-8M-12PK 1760 42.72
2000-8M-12PK 2000 42.72
DPL1765-22PL 1765 103.4
DPL1765-26PL 1765 122.2
DPL1965-22PL 1965 103.4
DPL1965-26PL 1965 122.2
425-5M-25 425 25
420-5M-25 420 25
350-5M-25 350 25
Leave Message
Please feel free to give your inquiry in the form below.We will reply you within 24 hours
Shaoxing CSHBELT Co., Ltd.
Product Catalog